Intermec 6710 - Manual (Page 152)

SECTION 4
"
Configuration
4-86 6710 Access Point User’s Guide
Security Options
Use [Security] to set these passwords:
Password “************”
Service Password <Enabled>
Advanced Password “************”
Password
This option is the top-level password you need to access the
configuration menus. The prompt is:
Range is:
16 chars
Enter 16 or fewer alphanumeric characters for this
password. It is case insensitive and can be any combination
of letters, numbers, and symbols. For security, the
password appears as asterisks on the screen.
Service Password
Intermec maintains a service password so its Customer
Response Center can configure this access point if
necessary. For example, if you forget what the
configuration menus’ top-level password is, the Customer
Response Center can access the menus through the service
password.
By default, the Service Password is enabled. If setting a
service password violates your security guidelines, you can
disable it. If it is already disabled and you forget the
configuration menus’ password, you may need to send this
access point to a Service Center to be reconfigured.
Contact the Customer Response Center for more
information about the service password. See the Preface for
contact information.