Intel IA-32 - Manual (Page 173)

Vol. 3A 4-43
PROTECTION
4.13.3 Reserved Bit Checking
The processor enforces reserved bit checking in paging data structure entries. The bits being
checked varies with paging mode and may vary with the size of physical address space.
Table 4-9 shows the reserved bits that are checked when the execute disable bit capability is
enabled (CR4.PAE = 1 and IA32_EFER.NXE = 1). Table 4-9 and Table 4-10 show the
following paging modes:
•
Non-PAE 4-KByte paging: 4-KByte-page only paging (CR4.PAE = 0, CR4.PSE = 0).
•
PSE36: 4-KByte and 4-MByte pages (CR4.PAE = 0, CR4.PSE = 1).
•
PAE: 4-KByte and 2-MByte pages (CR4.PAE = 1, CR4.PSE = X).
In legacy PAE-enabled paging, some processors may only support a 36-bit (or 32-bit) physical
address size; in such cases reserved bit checking still applies to bits 39:36 (or bits 39:32). See
the table note.
If execute disable bit capability is not enabled or not available, reserved bit checking in 64-bit
mode includes bit 63 and additional bits. This and reserved bit checking for legacy 32-bit paging
modes are shown in Table 4-10.
Table 4-9. IA-32e Mode Page Level Protection Matrix
with Execute-Disable Bit Capability Enabled
Mode Paging Mode Check Bits
32-bit 4-KByte paging (non-PAE) No reserved bits checked
PSE36 - PDE, 4-MByte page Bit [21]
PSE36 - PDE, 4-KByte page No reserved bits checked
PSE36 - PTE No reserved bits checked
PAE - PDP table entry Bits [63:40] & [8:5] & [2:1] 1
PAE - PDE, 2-MByte page Bits [62:40] & [20:13] 1
PAE - PDE, 4-KByte page Bits [62:40] 1
PAE - PTE Bits [62:40] 1
64-bit PML4E Bits [51:40]
PDPTE Bits [51:40]
PDE, 2-MByte page Bits [51:40] & [20:13]
PDE, 4-KByte page Bits [51:40]
PTE Bits [51:40]
NOTE:
1. Reserved bit checking also applies to bits 39:36 for processors that support only 36-bits of physical
address. For processor that support only 32 bits of physical address, reserved bit checking also applies
to bits 39:32.