Intel IA-32 - Manual (Page 530)

14-4 Vol. 3A
MACHINE-CHECK ARCHITECTURE
Where:
•
Count field, bits 0 through 7 — Indicates the number of hardware unit error-reporting
banks available in a particular processor implementation.
•
MCG_CTL_P (register present) flag, bit 8 — Indicates that the MCG_CTL register is
present when set and absent when clear.
Bits 9 through 63 are reserved. The effect of writing to the MCG_CAP register is undefined.
14.3.1.3 IA32_MCG_STATUS MSR
The IA32_MCG_STATUS MSR (called the MCG_STATUS MSR for P6 family processors)
describes the current state of the processor after a machine-check exception has occurred (see
Figure 14-4).
Where:
•
RIPV (restart IP valid) flag, bit 0 — Indicates (when set) that program execution can be
restarted reliably at the instruction pointed to by the instruction pointer pushed on the stack
when the machine-check exception is generated. When clear, the program cannot be
reliably restarted at the pushed instruction pointer.
•
EIPV (error IP valid) flag, bit 1 — Indicates (when set) that the instruction pointed to by
the instruction pointer pushed onto the stack when the machine-check exception is
generated is directly associated with the error. When this flag is cleared, the instruction
pointed to may not be associated with the error.
•
MCIP (machine check in progress) flag, bit 2 — Indicates (when set) that a machine-
check exception was generated. Software can set or clear this flag. The occurrence of a
second Machine-Check Event while MCIP is set will cause the processor to enter a
shutdown state. For information on processor behavior in the shutdown state, please refer
to the description in Chapter 5, “Interrupt and Exception Handling”: “Interrupt 8—Double
Fault Exception (#DF)”.
Bits 63-03 in IA32_MCG_STATUS are reserved.
Figure 14-4. IA32_MCG_STATUS Register
EIPV—Error IP valid flag
MCIP—Machine check in progress flag
63 0
Reserved
1 2 3
E
I
P
V
M
C
I
P
R
I
P
V
RIPV—Restart IP valid flag