SIGMA LBA-708 - Manual (Page 218)

Operator’s Manual LBA-PC 218
StartRecord I Number of frames to write.
Key Type Value Description
appended.
Maximum 256 characters.
default = drive, path, and filename from last
load or save config
A.5.1.2 SDC - save configuration
NOTE: There is no default path for this command. If you want the configuration to be saved in a particular path
then send the path with the file name.
:SDC <configuration> 1,3
:SDC
Key Type Value Description
ConfigFileName 6 S Name of configuration file to load.
If no extension (i.e. no period) then .CFG is
appended.
Maximum 256 characters.
default = drive, path, and filename from last
load or save config
A.5.1.3 LDD - load data from file
NOTE: There is no default path for this command. If you want the data file to be loaded from a particular path
then send the path with the file name.
:LDD <configuration> 1,3
:LDD?
Key Type Value Description
FileName 6 S Name of file to load.
If no extension (i.e. no period) then .LB3/4/5/7
is appended to data and reference frames. .GAI
is appended to gain frame files.
Maximum 256 characters.
default = filename from last load or save data
command.