SIGMA LBA-708 - Manual (Page 36)

entries. The Summed image is organized Horizontal data first, left to right, followed by a carriage
return, and then the Vertical data, top to bottom.
Note: Exported image files cannot be read back into the LBA-PC’s frame buffer. Use Save As... and Load... for
retrievable data files.
3.1.3.1 Export Image… dialog box
Enter the drive:\paths\and <filename> of the Export File Name that you want to create. Press
Browse... if you want to overwrite an existing file, and you are not sure of the file’s name or
location and wish to search for it.
Figure 8
Enter the Start Frame buffer location from which you want to begin exporting image data files.
If you wish to save multiple images, enter the Number of Frames that you want to export.
Multiple export images can only be saved sequentially from the Start Frame location. You can
specify 0, or 1 to the number of frames in the frame buffer. 0 means all the frames in the frame
buffer.
When Exporting multiple images, each image will be placed into a separate file. The file name
will automatically have a six-digit number appended to the entered file name. This number will
designate each file in the sequence starting with 000000 and counting up. Thus a given multiple
export will create a series of files that will appear as follows:
Operator’s Manual LBA-PC 36