SIGMA LBA-708 - Manual (Page 219)

Key Type Value Description
Operator’s Manual LBA-PC
Doc. No. 10654-001, Rev 4.10
219
frames. .GAI is appended to gain frame files.
1 to n. ‘n’ is the number of records in the file.
NumberRecords I 0 = all records (up to frame buffer size)
1 to n. ‘n’ is the size of the frame buffer.
forced to 1 when StartFrame < 1
StartFrame I First frame saved.
-1 = gain frame
0 = reference frame
1 to n. ‘n’ is the size of the frame buffer
default = current frame
Replace B true = replace
If the camera or the camera resolution stored in
the file do not match the current configuration
then the LBA-PC must replace the current
camera or change the resolution before the
frame can be loaded. Either of these changes
results in clearing the frame buffer (i.e., all
current frames are discarded). If the pixel scale
stored in the file does not match the current
pixel scale then the pixel scale will be set to the
value in the file.
false = do not replace
If the camera or camera resolution stored in the
file do not match then an error is generated.
forced to false when StartFrame < 1
default = false
A.5.1.4 SDD - save data to file
NOTE: There is no default path for this command. If you want the to be saved in a particular path then send the
path with the file name.
:SDD <configuration> 1,3
:SDD?
Key Type Value Description
FileName 6 S Name of file to load.
If no extension (i.e., no period) then .LB3/4/5/7
is appended to data, reference, and ultracal