SIGMA LBA-708 - Manual (Page 250)

Message Generated By
%s detected but cannot be initialized. LBA-PC set
to Off-Line mode.
device driver
Unable to load LCA program file (%s). device driver
Press OK to stop Auto Calibration. ultracal
A.5.4.6 FRM - upload/download a data frame
Only one frame at a time can be uploaded or downloaded. :FRM will upload a frame of data
from the controller to the LBA-PC, while :FRM? will download a frame of data from the LBA-PC to
the controller. Data is uploaded to or downloaded from the LBA-PC’s frame buffer.
:FRM? <configuration> (LBA300PC → CONTROLLER)
Key Type Value Description
FrameNumber I frame number
-1 = gain frame
0 = reference frame
1 to n. ‘n’ is the size of the frame buffer.
default = current frame
Returns:
FRM FrameNumber=f;#dn..n(DAB)(DAB)…(DAB)(DAB)
Where:
f = frame number
# = pound symbol
d = number of digits to follow in n..n
n..n = number of data bytes
(DAB) = data byte - 8-bit data byte
:FRM [FrameNumber=f;][Replace=B;]#dn..n(DAB)(DAB)…(DAB)(DAB)
:FRM <configuration> (CONTROLLER
→ LBA300PC)
(DAB)(DAB)…(DAB)(DAB) must be exactly what was returned by a previous :FRM? command.
Where:
f = frame number
# = pound symbol
Operator’s Manual LBA-PC 250
d = number of digits to follow in n..n