Siemens Simantic Net NCM for Industrial Ethernet S7 - Manual (Page 178)

NCM S7 Diagnostics
178
SIMATIC NET NCM S7 for Industrial Ethernet
C79000-G8976-C129–06
6.2.1 Installing and Starting NCM S7 Diagnostics
Installation
NCM S7 Diagnostics is an integrated component of the NCM S7 for Industrial
Ethernet optional package.
NCM S7 Ethernet Diagnostics is installed along with NCM S7 for Ethernet on your
PG.
There are several ways in which you can start the diagnostic tool:
S
From the standard Start menu of Win-
dows (program group
SIMATIC
" ... " NCM).
Use this method if the STEP 7 project
in which the CP was configured is not
available on your PG (for service pur-
poses).
S
From the Properties dialog of the CP within
your STEP 7 project.
Alternative 1 Alternative 2