Siemens Simantic Net NCM for Industrial Ethernet S7 - Manual (Page 71)

Installing and Starting the Ethernet CP with STEP 7
71
SIMATIC NET NCM S7 for Industrial Ethernet
C79000-G8976-C129–06
Relocating the CP in the Hardware Configuration
If you are using communication services with configured connections, the
connection IDs also identify the slot of the CP. If you “drag” a CP you have already
configured to a different slot, note the following:
Notice
If you drag the CP to a different slot, the data of the connection configuration are
automatically updated. The data of the connection configuration must, however, be
downloaded again!
-