Siemens Simantic Net NCM for Industrial Ethernet S7 - Manual (Page 59)

Installing and Starting the Ethernet CP with STEP 7
59
SIMATIC NET NCM S7 for Industrial Ethernet
C79000-G8976-C129–06
Diagnostics Tab
In the “Diagnostics” tab, you can start NCM S7 Ethernet Diagnostics.
See Chapter 6 Diagnostics for a description of the diagnostic functions
themselves.
Addressing Tab
In the ”Addressing” tab, you can assign the previously configured IP address and
IP parameters to the CP.
This is necessary before the configuration data can be downloaded to the CP over
Ethernet.
For a detailed description, refer to Section 2.3.