Siemens Simantic Net NCM for Industrial Ethernet S7 - Manual (Page 66)

Installing and Starting the Ethernet CP with STEP 7
66
SIMATIC NET NCM S7 for Industrial Ethernet
C79000-G8976-C129–06
3. Start a network search for available modules by selecting the “Browse...”
button.
4. Select the CP with the matching MAC address from the components listed.
5. Enter the required IP parameters and assign them to the CP.
Result:
The CP is now accessible on Industrial Ethernet using the IP address.
Note
You will find further detailed information on this procedure in the STEP 7 online
help.