Sanyo PJLINK PLC-ZM5000L - Manual (Page 14)

⑰ ZOOM buttons
Zoom in and out the images (p.29).
㉕ D .ZOOM button
Select the Digital zoom +/- mode and resize the
image (p.43).
⑱ PIP button
Operate the Picture in Picture function (pp.30,
55-56).
㉑ FILTER button
Scroll the filter (p.30).
⑮ FREEZE button
Freeze the picture on the screen (p.30).
㉔ KEySTONE button
Correct keystone distortion (pp.31, 44, 50).
⑲ ON/OFF switch
When using the remote control, set this switch
to “ON”. Set it to “OFF” for power saving when
it is not in use (p.16).
⑯ LENS SHIFT button
Select the Lens Shift function (p.29).
⑬ P-TIMER button
Operate the P-timer function (pp.30, 60).
㉚ NUMBER buttons
Act as number buttons. Use these buttons when
setting the remote control codes (p.16) or when
entering the PIN code numbers (pp. 23, 54, 62).
㉙ POINTER button
Act as the On-Off switch for the Pointer (pp.30,
32, 60).
Part Names and Functions
㉖ INPUT 1- 3 buttons
Select an input source (INPUT 1 – INPUT 3)
(pp.33-35).
Remote Control
㉒ FOCUS buttons
Adjust the focus (p.29).
㉘ SCREEN button
Select the screen size (p.29).
㉓ INFO . button
Display the input source information (p.29).
⑭ IMAGE SEL . button
Operate the image selection function (pp.40, 46).
㉗ IMAGE ADj . button
Operate the image adjustment function (pp.41-
42, 47-48).
⑯
⑮
⑲
⑰
⑱
㉓
㉒
㉔
㉕
For PIN code
and remote
control code.
㉖
㉑
⑳
㉗
⑭
㉙
㉘
㉚
⑬
⑳ WIRED REMOTE jack
Connect the remote control cable (not supplied)
to this jack when using as a wired remote
control.
14