Sanyo PJLINK PLC-ZM5000L - Manual (Page 47)

1
2
Press the Point ◄ button to decrease the contrast; press
the Point ► button to increase the contrast (from 0 to
63).
Press the Point ◄ button to decrease the brightness;
press the Point ► button to increase the brightness
(from 0 to 63).
Press the Point ◄ button to lighten red tone; press the
Point ► button to deepen red tone (from 0 to 63).
Press the Point ◄ button to lighten green tone; press
the Point ► button to deepen green tone (from 0 to 63).
Press the Point ◄ button to lighten blue tone; press the
Point ► button to deepen blue tone (from 0 to 63).
Use the Point ◄► buttons to select the desired Color
temp. level ( High, Mid, Low or XLow).
Press the Point ◄ button to decrease the intensity of the
color; press the Point ► button to increase the intensity
of the color (from 0 to 63).
Press the Point ◄► buttons to adjust the tint value to
get a proper color balance (from 0 to 63).
 Note:
• When White balance Red, Green or Blue is adjusted, the Color temp. level will change to Adj..
• Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.45).
Image adjust Menu
Selected Image mode
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Image
adjust and then press the Point ► or the SELECT
button.
Use the Point ▲▼ buttons to select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point ◄► buttons to
adjust the setting value.
Use the Point ◄► buttons
to adjust the setting value.
Video Input
Image Adjustment
Contrast
Brightness
Color
Tint
Color temp .
White balance (Green)
White balance (Red)
White balance (Blue)
Iris
This iris function effectively increase the contrast intensity.
Press the Point ◄► buttons to select Off or On.
Off ...... Disabled.
On ...... Contrast is prioritized over brightness.
47