Sanyo PJLINK PLC-ZM5000L - Manual (Page 46)

Video Input
Image Level Selection
Normal picture level preset on the projector.
Picture level adjusted with fine tone.
User preset picture adjustment in the Image adjust Menu.
(p.48)
Image select Menu
1
2
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Image
select and then press the Point ► or the SELECT
button.
Use the Point ▲▼ buttons to select the desired
item and then press the SELECT button.
Menu Operation
Standard
Cinema
Image 1–10
For viewing pictures in a bright room.
Dynamic
Natural picture level preset on the projector.
Natural
* The factory default setting is Standard.
Direct Operation
The Image Selection function can be operated directly by
pressing the IMAGE SEL. button on the remote control.
the last stored image will be displayed on the screen for
about 4 seconds.
IMAGE SEL .
button
46