Sanyo PJLINK PLC-ZM5000L - Manual (Page 62)

Setting
Enter a PIN code
Change the PIN code
Use the Point ▲▼ buttons to select Off, On 1 or On 2.
Press the SELECT button to close the dialog box.
Change the PIN code lock setting
Enter a PIN code
When using side control
Use the Point ▲▼ buttons on the side control to select a
number. Press the Point ► button to fix the number and
move the red frame pointer to the next box. The number
changes to . If you fix an incorrect number, use the Point
◄ button to move the pointer to the number you want to
correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
Set. Press the SELECT button so that you can start to
operate the projector.
When using remote control
Press the Number buttons on the remote control to enter
a number (p.14). When you complete entering a four-digit
number, the pointer moves to “Set”. Press the SELECT
button so that you can start to operate the projector.
If you enter an incorrect PIN code, PIN code and the
number () will turn red for a moment. Enter the
correct PIN code all over again.
The PIN code can be changed to your desired four-digit
number. Press the Point ▼ button to select PIN code
change and press the SELECT button. The Current PIN
code dialog box appears. Use the Point ▲▼ buttons
to set the current PIN code. The New PIN code dialog
box appears. Set a new PIN code, the confirmation box
appears, and choose yes to set the new PIN code.
CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE,
WRITE DOWN THE NEW PIN CODE IN COLUMN
OF THE PIN CODE NO . MEMO ON PAGE 87, AND
KEEP IT SECURELy . IF yOU FORGET yOUR PIN
CODE, THE PROjECTOR CAN NO LONGER BE
STARTED .
PIN code change
Use the Point ▲▼ buttons on the side control or Number
buttons on the remote control to enter a number.
62