Sanyo PJLINK PLC-ZM5000L - Manual (Page 28)

Side Control
Basic Operation
1
2
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select
Sound. Press the Point ► or the SELECT button
to access the submenu items.
Press the VOLUME+/– buttons on the side control
or on the remote control to adjust the volume. The
volume dialog box appears on the screen for a few
seconds.
Press the MUTE (Point ▼) button on the remote
control to select On to temporarily turn off the sound.
To turn the sound back on, press the MUTE (Point
▼) button again to select Off or press the VOLUME
+/– buttons.
Press the SELECT button to switch the mute
function On/Off. When the sound is turned off, On is
displayed. Press the VOLUME +/– buttons again to
turn the sound back on.
Use the Point ▲▼ buttons to select the desired
submenu item and press the SELECT button to
access the selected item.
Volume
Volume
Mute
Press the Point ► button to turn up the volume;
press the Point ◄ button to turn down the volume.
Mute
Sound Menu
Volume Dialog Box
Approximate level
of the volume.
Press the Point ▼ button to set
the Mute function On or Off.
The dialog box disappears after
4 seconds.
Press the Point ▲▼ buttons to switch the Built-in
SP function On/Off. When the Built-in SP sound is
turned off, Off is displayed.
Built-in SP

Note:
Sound function can not be operated via the remote
control or the Screen Menu, when Network is
selected in Input Menu.
Remote Control
VOLUME +/–
buttons
Sound Adjustment
Direct Operation
Menu Operation
VOLUME + button
VOLUME – button
MUTE (Point ▼)
button
28