Installation, Analog out signal table – Sanyo PJLINK PLC-ZM5000L User Manual
Page 20
Unplug the power
cords of both the
projector and external
equipment from the
AC outlet before
connecting cables.
Cables used for connection ( = Cables not supplied with this projector.)
• Video cable (RCA x 1 or RCA x 3)
• BNC cable (BNC x 1 or BNC x 3)
• S-video cable
• Scart-VGA cable
• HDMI cable
Installation
Analog Out Signal Table
A cable with one
end D-sub 15
and the other
end (Black box)
compatible with
each equipment
is necessary.
Connecting to Video Equipment (Video, S-video, HDMI)
RGB Scart
21-pin
Output
S-video
cable
S-video
Output
Composite
Video
Y - Pb/
Cb - Pr/Cr
BNC
cable
Component
Video Output
Composite
Video
Component Video
Output (Y, Pb/Cb,
Pr/Cr)
HDMI
Output
HDMI
cable
Scart-
VGA
cable
Video
HDMI
ANALOG
IN
ANALOG
OUT
S-VIDEO
Refer to the
Analog Out
Signal Table
(above).
Video Y - Pb/
Cb - Pr/Cr
DVI-Digital
cable
DIGITAL
IN
RCA
cable
Digital Output
(HDCP
compatible)
Input Terminal
Monitor Out
Cable
Input 1
D-sub15
RGB (PC analog)
YES
RGB (SCART)
NO
DVI
RGB (PC digital)
NO
RGB (AV HDCP)
NO
HDMI
HDMI
NO
Input 2 5 BNC
RGB
YES
Video
YES
Y, Pb/Cb, Pr/Cr
YES
Input 3
RCA
Y, Pb/Cb, Pr/Cr
YES
S-video
S-video
NO
Video
Video
YES
Network
NO
20