Sanyo PJLINK PLC-ZM5000L - Manual (Page 30)

Press the FREEZE button on the remote control to freeze
the picture on the screen and Audio mute. To cancel the
FREEZE function, press the FREEZE button again or
press any other button.
Fig.1 will appear when the Freeze function is working.
FREEZE button
FILTER button
Press and hold the FILTER button for more than
5 seconds to operate electrically operated filter to
replace the filter.
Remote Control
POINTER button
FILTER button

Note:
See the previous page for the
description of other buttons.
MOUSE
POINTER button
Basic Operation
 Note:
• The filter cannot be rewound.
• When the filter is replaced, the total accumulated
time of the filter use is automatically set to 0.
FREEZE button
P-TIMER button
Move the pointer on the screen with this button.
MOUSE POINTER button
POINTER button
P-TIMER button
Fig.1
PIP button
Press the PIP button on the remote control several
times until the desired mode of Picture in Picture
appears. Each user mode (User 1-5) appears only
when it has stored data.
Press and hold the PIP button for more than 3
seconds to display the setting dialog box of Picture
in Picture. See pages 55-56 for details of Picture in
Picture function.
PIP button
User 1 of PIP (example)
User 2 of PIP (example)
Main
picture
Sub
picture
Sub
picture
Main
picture
IMAGE ADj . button
IMAGE ADj . button
Press POINTER button on the remote control to display
the Pointer on the screen. (see pages 32, 60)
Press the P-TIMER button on the remote control to
operate the Count up/Count down function. See page 60
for details of Setting for the P-timer function.
To stop the count time, press the P-TIMER button.
To cancel the P-timer function, press and hold the
P-TIMER button for a few seconds.
Press the IMAGE ADJ. button on the remote control to
display the On-Screen Menu of Image Adjustment. See
pages 41-42 and 47-48 for details of its functions. To cancel
its function, press the IMAGE ADJ. button directly over again.
30