Sanyo PJLINK PLC-ZM5000L - Manual (Page 63)

Shutter function is available to block out light to the screen,
so that the screen can be used for the other presenters.
Prohibit the shutter operation from the remote control
and the projector's side control.
…………… Permit the shutter operation from
both the remote control and the
projector's side control.
…………… Prohibit the shutter operation from
the remote control.
…………… Prohibit the shutter operation from
the side control.
…………… Prohibit the shutter operation from
both the remote control and the
projector's side control.
Protection
The Shutter Management function turns off the projection
lamp when the projector is left with the shutter closed
and the set time has passed away. The count-down time
can be set between 5 and 480 minutes. When the count-
down time has elapsed, the shutter will be opened up
automatically and the lamp will be turned off to cool itself
down. The SHUTTER indicator is blinking blue during
this cooling-off period. When the lamp has been fully
cooled down, the POWER indicator turns green lighting
and the SHUTTER indicator keeps blinking. Should the
ON / STAND-BY button be pressed in this condition,
the projection lamp will be turned on and the SHUTTER
indicator turns off.

Note:
The Shutter Management function cannot be halted.
Setting
Shutter
Shutter
Management
Release key
By using the Release function from the following options, the
Shutter can be released when it stays activated (i.e. when it
is closed. )
Any …… By pressing any button on the projector's side
control or the remote control, the shutter can be
released when it is closed, and meanwhile the
function of the selected item will come into effect.
* If the MUTE button on the remote control is pressed when
the shutter is closed, only the shutter will be released.
SHUTTER… Only by pressing the SHUTTER button on the
projector’s side control or the remote control
the shutter can be released when it is closed.
In addition, when the Shutter is functioning, only the
following buttons are active:
-- INPUT button and ON/STAND-BY button on the
projector’s side control
-- INPUT 1/2/3 buttons and STAND-BY button on the
remote control
 Note:
When the shutter is closed, if the
projector is turned off and on, the
shutter will be released.
63