Sanyo PJLINK PLC-ZM5000L - Manual (Page 71)

Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens
cleaner, or use a lens cleaning paper or commercially
available air blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the lens.
Unplug the AC power cord before cleaning.
Gently wipe the projector body with a soft dry cleaning
cloth. When the cabinet is heavily soiled, use a small
amount of mild detergent and finish with a soft dry
cleaning cloth. Avoid using an excessive amount of
cleaner. Abrasive cleaners, solvents, or other harsh
chemicals might scratch the surface of the cabinet.
When the projector is not in use, put the projector in
an appropriate carrying case to protect from dust and
scratches.
Maintenance and Care
Cleaning the Projection Lens
Cleaning the Projector Cabinet
Do not use any flammable solvents or air sprays on the projector and in its vicinity. The explosion or fire
hazard may occur even after the AC power cord is unplugged because the temperature inside the projector
is extremely high due to the lamps. In addition, there is a risk that the internal parts may be damaged not
only by the flammable air spray but also by the cold air.
CAUTION
71