Indicators and projector condition, Projector condition, Appendix – Sanyo PJLINK PLC-ZM5000L User Manual
Page 79: Indicators
Check the indicators for the projector condition.
Indicators
Projector Condition
POWER
green
LAMP
red
WARNING
TEMP.
red
WARNING
FILTER
orange
SHUTTER
blue
LAMP
REPLACE
orange
The projector is off. (The AC power cord is
unplugged.)
The projector is in stand-by mode. Press
the ON/STAND-BY button to turn on the
projector.
The projector is operating normally.
(The shutter is open)
The projector is operating normally.
(The shutter is closed)
The projector is preparing for stand-by or
the projection lamp is being cooled down.
The projector cannot be turned on until
cooling is completed and the POWER
indicator lights green.
The projection lamp is being cooled down in
the Power management mode.
The projector is in the Power management
mode.
The projection lamp is being cooled down in
the Shutter management mode.
The projector is in the Shutter management
mode. Press the ON/STAND-BY button to
turn on the projector.
The filter is scrolled using the FILTER button
on the remote control or the Filter control
function in the setting menu. When the filter
is being scrolled, the Filter replacement icon
and
Please wait . . . message (Fig. 1) appear
on the screen for about 30 seconds.
The projector is operating normally .
• • • on
• • • off
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • • dim
• • • blinking slow (approx. 2 seconds
ON, 2 seconds OFF)
Appendix
Fig .1 Filter replacement icon and
Please wait . . ..
• • • on (blue)
❊
❊
• • • blinking at the normal
rate (blue and dim red)
(approx. 1 second ON, 1
second OFF)
❊
• • • blinking fast (blue and dim red)
(approx. 0.5 seconds ON, 0.5
seconds OFF)
• • • blinking fast (approx. 0.5 seconds
ON, 0.5 seconds OFF)
• • • on (red)
❖
❖
• • • dim (red)
❖
❖
❖
❖
❖
• • • Differ according to conditions.
Indicators and Projector Condition
❊
❊
❊
❖
❖
❖
79