Sanyo PJLINK PLC-ZM5000L - Manual (Page 12)

① ON/STAND-By button
Turn the projector on or off (pp.23-24).
② MENU button
Open or close the On-Screen Menu (p.25).
⑤ Point ▲▼◄► ( VOLUME – / + ) buttons
– Select an item or adjust the value in the
On-Screen Menu (p.25).
– Pan the image in Digital zoom + mode
(p.43).
– Adjust the volume level (with Point ◄►
buttons) (p.28).
⑩ WARNING TEMP . indicator
Blink red when the internal temperature of
the projector exceeds the operating range
(pp.72, 79-80).
④ SHUTTER button
Close and open up the built-in shutter (p.27).
⑧ POWER indicator
– Light green while the projector is in stand-
by mode.
– Light green during operations.
– Blink green in the Power management
mode (p.59).
③ SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the
Digital zoom mode (p.43).
⑨ LAMP indicator
Light red during operations.
⑬ LAMP REPLACE indicator
Light orange when the projection lamp
reaches its end of life (pp.69, 80).
⑪ WARNING FILTER indicator
– Blink slow when the filter is being scrolled
(pp.66, 79).
– Blink fast when the filter scroll is not
working properly or the filter cartridge is not
installed (pp.66, 81).
– Light orange when the clogging of the filter
is detected or the filter counter reaches
a time set in the timer setting, urging
immediate filter/ filter cartridge replacement
(pp.65, 66, 81).
①
Side Control
Indicators (on the top panel)
Part Names and Functions
⑦ INPUT button
Select an input source (pp.33-35).
⑥ LENS button
Enter the focus, zoom, and lens shift
adjustment mode (p.27).
②
④ ⑥
③
⑤
⑦
⑨
⑧
⑩
⑪
⑫
⑬
⑫ SHUTTER indicator
Light blue when the shutter is closed (p.79).
Side Control and Indicators
12