Konica Minolta 7075 - Manual (Page 107)

Basic Operations 6-37
Basic Operations
Check Mode and Proof Copy (continued)
1 Touch the desired copying condition key on the Check Screen to highlight it. The
dimmed CHANGE SETTING key will become clear.
NOTES: • Any key that cannot be highlighted indicates that the copying condition cannot be changed from the
Check Screen.
• Although the following application functions can be highlighted, they cannot be changed because
the CHANGE SETTING key will be kept dimmed: Overlay, Non-image area erase, Reverse image,
AUTO layout.
2 Touch CHANGE SETTING . The LCD will display an appropriate screen to change the
copying condition selected.
• Selecting a basic copying condition key will display the Basic Screen.
• Selecting Enhance key will display the Change Enhance Selection Screen.
• Selecting Non STD Size key will display the Non STD Size Setting Screen.
• Selecting an application function key will display the Change Application Selection
Screen.
3 Change the setting as desired, then restore the Check Screen to return to the
checking steps, or to the Basic Screen to start copying.
Check Screen
To release the settings:
1 Touch the desired special original key or application function key on the Check Screen
to highlight it. The dimmed RELEASE SETTING key will be clear.
2 Touch RELEASE SETTING .
3 Touch YES to cancel the application function, or NO to restore.
When YES is touched, the selected function will be released and the key will disappear
from the Check Screen.