Konica Minolta 7075 - Manual (Page 90)

6-20 Basic Operations
Basic Operations
Copy Size (continued)
Selecting Paper Type/Size for Multi-sheet Bypass Tray (continued)
• When STD size (special) is highlighted, the popup menu will appear.
Use arrows to scroll to the desired size. In this case, both the copy size and type
selected will be indicated on the Basic Screen.
Paper Type/Size Selection Screen
• When Non STD size is highlighted, the popup menu will appear.
To set the vertical size, touch the vertical size key to highlight it, then use the
keypad on the popup menu to enter the vertical size, or use arrows to scroll to that
number.
To set the horizontal size, touch the horizontal size key to highlight it, then use the
keypad on the popup menu to enter the horizontal size, or use arrows to scroll to
that number.
In this case, the
Special indication and paper type selected will be displayed on the
Basic Screen, but the actual size information cannot be displayed.
Paper Type/Size Selection Screen