Konica Minolta 7075 - Manual (Page 98)

6-28 Basic Operations
Basic Operations
Store Mode
Store mode allows you to scan multiple originals by touching the STORE key on the
Basic Screen after setting copying conditions, and then outputting the complete set by
pressing [
START ].
Platen store mode: scan originals from the platen glass.
RADF store mode: scan originals from the RADF.
Platen Store Mode
Use Platen store mode for originals that cannot be fed through the document feeder due
to thickness, size or condition.
When scanning thick originals that require keeping the document cover open, select
Non-image area erase to prevent exposure of the glass area around the border of the
original. This feature ensures a clean copy result and reduces toner consumption. The
Non-image area erase mode automatically releases after the original for which it is
selected is scanned. Additional images may be scanned.
❒ Incompatible Basic copying conditions: None
❒ Incompatible Special Originals: None
❒ Incompatible Applications: None
1 Open the document feeder.
2 Place original FACE DOWN on the platen glass, then close the document feeder.
IMPORTANT: PLACE AND SCAN THE ORIGINALS IN REGULAR ORDER OF PAGINATION.
3 Make the desired copying selections, and select 1-1 or 1-2 copy mode.
4 Touch
STORE on the Basic Screen to highlight it.
5 Press [ START ] to scan the original.
6 Repeat steps 1, 2 and 5 until all originals are scanned.
7 Touch
STORE to exit the Store mode.
Basic Screen