Konica Minolta 7075 - Manual (Page 127)

Output Modes 7-13
Output Modes
Folding, Stapling & Folding and Trimming Modes
The Folding and Stapling & Folding modes are available only when the FS-108B
Finisher option is installed. The Trimming modes (Folding and Trimming, Stapling &
Folding and Trimming) are available only when the TU-108 Trimmer unit option is
installed on the FS-108B Finisher. When any mode is selected, the Booklet feature is
automatically selected and indicated on the Application Selection Screen.
NOTES: 1. When copying two-sided signature originals using the Folding, Stapling & Folding or Trimming
mode, release the automatically selected Booklet mode on the Application Selection Screen.
2. When copying dark originals or using Reverse Image mode together with Folding, Stapling &
Folding or Trimming mode, the folded line of the output copies may be slightly shifted.
The following copy results may be expected when using Folding, Stapling & Folding or
Trimming mode:
In the Folding mode, each copied set is folded and output to the Booklet tray of the
finisher.
In the Stapling & Folding mode, each copied set is stapled at two positions (saddle
stitched), then folded and output to the Booklet tray of the finisher.
In the Trimming modes, each copied set is either folded or stapled & folded; trimmed
at the edge that opens the booklet; then output to the Trimmer uint tray.
❒ Use RADF.
❒ Max. number of folded sheets (20 lb Bond) in both modes:
Folding; 3 sheets (less than in Staple & Folding mode because they are not cinched first)
Stapling & Folding:
16 sheets
15 sheets when using thick cover paper
Folding and Trimming; 3 sheets
Stapling & Folding and Trimming; 16 sheets
15 sheets when using thick cover paper
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R, A4R
❒ Paper weight: 16~24 lb; Special stock (20 lb paper is recommended)
❒ Booklet tray capacity:
When the Booklet tray capacity is exceeded, the finisher will stop operating. Select an
appropriate print quantity referring to the following capacity.
Approx. 100 sheets max.
Folding; 33 sets max. of 3-sheet-folded booklet (33 x 3 = 99 sheets)
Stapling & Folding; 20 sets max. of 5-sheet-folded booklet (20 x 5 = 100 sheets)
6 sets max. of 15-sheet-folded booklet (6 x 15 = 90 sheets)
❒ Trimmer unit tray capacity:
When the Trimmer unit tray capacity is exceeded, the finisher and trimmer unit will stop
operating. Select an appropriate print quantity referring to the following capacity.
Approx. 512 sheets max.
Folding and Trimming; 100 sets max. of 3-sheet-folded booklet (300 sheets max.)
Stapling & Folding and Trimming; 100 sets max. of 2~5-sheet-folded booklet (500 sheets max.)
50 sets max. of 6~10-sheet-folded booklet (500 sheets max.)
32 sets max. of 11~16-sheet-folded booklet (512 sheets max.)
❒ Incompatible Basic Copying Conditions with Booklet selected: APS, Sort, Staple-sort, Group,
Cover sheet feeding, 1-1, 2-1, Rotation Sort, Rotation Group