Konica Minolta 7075 - Manual (Page 35)

Safety Information 2-11
Safety Information
Finisher Capacity Requirements
CAUTION:
FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/OR
MACHINE DAMAGE
❒ FINISHER PAPER CAPACITY
To prevent paper misfeed, do not exceed the paper capacity of the Finisher.
FS-108/FS-108B Finisher paper weight: 16 lb ~ 24 lb
When the selected print quantity exceeds the maximum paper capacity, remove the
copied sheets from the finisher while the paper is exiting.
Paper capacities below are stated for 20 lb Bond or the same size.
This Finisher also accepts wide types of the regular sizes stated below.
Finisher FS-108/FS-108B
Primary (Main) tray: Non-sort/Sort/Group mode
500 sheets (5.5"x8.5"R)
3,000 sheets (8.5"x11", 8.5"x11"R)
1,500 sheets (11"x17", 8.5"x14")
The Secondary (sub) tray can be unloaded while the 7075 is running. Set
production is not limited by the capacity of the Secondary (sub) tray.
Primary (Main) tray: Staple-Sort mode
1,000 sheets* (11"x17" ~ 8.5"x11"/R)
*: The maximum capacity varies according to the number of copies to be
stapled.
See p. 4-9.
Secondary (Sub) tray: Non-sort mode
200 sheets max.
Booklet tray (FS-108B only)
100 sheets max. (11"x17", 8.5"x14", 8.5"x11", A4R)
(The maximum number of sheets varies, depending on the number of pages in
the booklet and whether Folding or Stapling & Folding is selected. See p. 4-10.)
Trimmer unit tray (FS-108B with TU-108 only)
512 sheets max. (11"x17", 8.5"x14", 8.5"x11", A4R)
(The maximum number of sheets varies, depending on the number of pages in
the booklet and whether Folding or Stapling & Folding is selected. See p. 4-11.)