Konica Minolta 7075 - Manual (Page 109)

Basic Operations 6-39
Basic Operations
Interrupt Mode (continued)
2 Remove any document from the platen glass or from the document feeder, if present.
3 Place new original(s) on the platen glass or in the document feeder.
4 The copying settings in Interrupt mode are as follows.
Copy Mode : 1 s 1
RADF : ON
AES : ON
Lens Mode : 1:1 (1.00)
APS : ON
Print Quantity : 1
Finisher : ON
Select other copying features that are compatible with the Interrupt mode, if desired.
5 Press [ START ].
6 When Interrupt copying is completed, press [ INTERRUPT ] again to return to the
settings of the initial job.
7 Replace the initial original, then press [ START ] to resume copying.
NOTES:
1 In Reserve mode, pressing [INTERRUPT] before the copier finishes scanning originals of the
reserve job will clear the settings selected for reserve job.
2 When [CHECK] is pressed during Interrupt Copying, the information displayed reflects the initial
copy job settings. Check mode will not display Interrupt copy job information.