Konica Minolta 7075 - Manual (Page 178)

9-26 Applications
Applications
Repeat Image
Use Repeat image to create labels, business cards, tickets, etc., by repeating the
selected image down the page.
Vertical/Horizontal Width Setting mode
Repeat the selected image area of 10mm ~ 150mm in both vertical and horizontal widths
measured from the rear right corner of the 11"x17" original area indicated on the right
edge of the platen glass.
Auto Detection mode
Selecting this mode will automatically set the equal repeat area to the size of the original
placed onto the platen glass by activating Non-image area erase.
Repeat mode
Select the repeating times of the original to be arranged in one copy sheet.
❒ Vertical/Horizontal Width Setting Mode Specifications
Use the platen glass. (Document feeder cannot be used.)
Repeat width: 10~150mm (in 1mm increments)
Copy mode: 1-1 mode only (When selecting 1-2 mode, Platen store mode will function automatically.)
❒ Auto Detection Mode Specifications
Use the platen glass. Non-Image Area Erase will function automatically.
Scanning area: 11"x17" ~ 10mm x 10mm
Repeat image area: Original image area detected by Non-Image Area Erase
Copy mode: 1-1 mode only (When selecting 1-2 mode, Platen store mode will function automatically.)
❒ Repeat Mode Specifications
Magnification ratio: 1.00 (100 %)
Scanning area: 11"x17" ~ 10mm x 10mm
Repeat image area: A portion of the selected copy size equally divided according to the mode
(2, 4, or 8 Repeat) designated on the screen. If detected image size is larger than the size
figured out as above, the copy result may not be satisfactory.
❒ Incompatible Conditions with Vertical /Horizontal Width Setting Mode
Basic copying conditions: Using RADF, Rotation, 2-2, 2-1, APS, AMS, Group, Rotation Sort,
Rotation Group
Special Originals: Resolution (Very high), Mixed Original, Z-Folded Original, SDF
Applications: Sheet/Cover Insertion, Chapter, Combination, Booklet, Transparency Interleave,
Image Insert, Book Copy, Non-Image Area Erase, Reverse Image, Frame/Fold Erasure, AUTO
Layout, Image Shift, Overlay
❒ Incompatible Conditions with Auto Detection Mode
Basic copying conditions: Using RADF, Rotation, 2-2, 2-1, APS, AMS, Group, Rotation Sort,
Rotation Group
Special Originals: Resolution (Very high), Mixed Original, Z-folded Original, SDF
Applications: Sheet/Cover Insertion, Chapter, Combination, Booklet, Transparency Interleave,
Image Insert, Book Copy, Reverse Image, Frame/Fold Erasure, AUTO Layout, All-Image Area,
Image Shift, Overlay