Applications, Frame/fold erasure (continued) – Konica Minolta 7075 User Manual
Page 182
9-30 Applications
Applications
Frame/Fold Erasure (continued)
1 Touch
APPLI.
on the Basic Screen to display the Application Selection Screen.
2 Touch
Frame/Fold Erasure
to display the Frame/Fold Erasure Selection Screen.
3 Touch
Frame Erasure (All sides)
or
Frame Erasure (Each side)
. Touch
Fold Erasure
to
use the Fold erasure mode.
• Touch
Frame Erasure (All sides)
to enter the frame erasure amount of the up, down,
right and left sides collectively using the touch screen keypad or up/down arrow key,
from 1~15mm.
• Touch
Frame Erasure (Each side)
to enter the frame erasure amount of the up, down,
right or left side individually. Touch
UP SIDE
,
RIGHT SIDE
,
DOWN SIDE
, or
LEFT
SIDE
, then use the touch screen keypad or up/down arrow key to enter the desired
amount, from 1~15mm.
• To enter the fold erasure amount, touch
Fold Erasure
, then touch
FOLD
. Use the touch
screen keypad or up/down arrow key to enter the desired amount, from 1~30mm.
4 Touch
OK
to complete the setting. The Application Selection Screen will be displayed.
5 Touch
OK
to return to the Basic Screen or make additional application selections.
6 Select desired Copy Size.
7 Enter desired print quantity.
8 Position original(s) FACE UP in the document feeder or FACE DOWN on the platen
glass.
When using Platen store mode, see p. 6-28 to p. 6-29.
When using RADF store mode, see p. 6-30.
Option: Press [CHECK] to view the selection, and make a Proof copy if desired; then touch EXIT to return
to the Basic Screen. See p. 6-35 to p. 6-37.
9 Press [
START
].
After copying is completed, touch
Frame/Fold Erasure
on the Application Selection
Screen or press [
AUTO RESET
] to release the mode and reset the machine.
NOTE: While copy size and original size generally should be the same, it is possible to use Frame/Fold
Erasure to copy an 11"x17" original to 8.5"x11"R by selecting 0.65 reduction after selecting Copy
Size.
Frame/Fole Erasure Selection Screen
(with Each side selected)
Frame/Fold Erasure Selection Screen
(with FOLD selected)