Konica Minolta 7075 - Manual (Page 44)

3-8 Machine Information
Machine Information
Site Requirements (continued)
NOTES:
1 Dimensions are in inches with millimeters included in parentheses.
2 The Finisher main tray of the FS-108/FS-108B Finisher gradually goes down while printed material is
output. DO NOT allow any object to interfere with the operation of the tray on the left side of the finisher,
as any interference may cause damage to the finisher.
135.0
(3430)
104.7
(2660)
44.0
(1117)
5.9
(150)
24.6
(626)
30.3
(770)
Konica 7075 + FS-108B + TU-108 + LT-411
72.6
(1845)
30.5
(775)
37.4
(950)
4.7
(120)
Unit: inches (mm)
47.4
(1203)
15.7
(400)
63.1
(1603)
21.7
(550)
34.95
(887)
3.9
(100)