Konica Minolta 7075 - Manual (Page 268)

13-44 Key Operator Mode
Key Operator Mode
Memory Switch Setting [13] (continued)
[23] Job offset operating
Set the copier to offset the copies of different jobs when outputting multiple reserve jobs
in succession.
[24] Continuation print
Set the copier to output multiple reserve jobs in succession.
[25] SDF Auto start
Select to feed the SDF original automatically when placed on the RADF, or press
[
START ] to feed the SDF original.
[26] Key click sound
Activate or deactivate the sound each time a key is pressed on the touch panel .
[27] 1 SHOT indication time
Select the SHOT indication time function.
[28] Power save screen
Select the screen to display when pressing the [
POWER SAVER ON/OFF ] key .
[29] START key latch function
Activate or deactivate the latch function.
[30] STOP key function
Select to display or not to display the confirmation message when STOP key is pressed.
[31] Auto select of Booklet copy
Set the copier with FS-108B mounted to automatically select the Booklet mode when
Stapling & Folding or Folding output mode is selected.
[32] E.C.M. password
Select the acceptable number of digits for the ECM master key code.
[33] Arrow key change (Image Shift)
Select the 1 step unit of the touch key to specify the shift amount in Image shift.
[34] Exit direction of 1 sheet
Select to exit face up or face down when making only 1 sheet of copy.
[35] An interruption suspend way
Select the timing to stop the job in progress when [
INTERRUPT ] is pressed.