Konica Minolta 7075 - Manual (Page 166)

9-14 Applications
Applications
Booklet (continued)
CAUTION
The roller drive unit is located inside the Booklet tray of the finisher. DO NOT put your hand into the
roller drive unit when removing folded or stapled & folded sheets; otherwise, you may be injured.
Output Menu Screen
(2) Touch OK on the Output Menu Screen. The Basic Screen will be restored with the
OUTPUT APPLI. highlighted.
11 Enter the desired print quantity.
12 Position letter-size originals FACE UP in portrait orientation ( ) onto the document
feeder.
When using Platen store mode, see p. 6-28 to p. 6-29.
When using RADF store mode, see p. 6-30.
NOTE: When loading originals, heed the following limits on capacity:
Folding / Folding and Trimming mode;
6 pages or less for simplex copying
12 pages or less for duplex copying
Stapling & Folding / Stapling & Folding and Trimming mode;
32 pages or less for simplex copying
64 pages or less for duplex copying
Exceeding the above limits on capacity may cause misfeeds in the finisher.
Option: Press [CHECK] to view the selection, and make the Proof copy, if desired; then touch EXIT to
return to the Basic Screen. See p. 6-35 to p. 6-37.
13 Press [ START ].
NOTE: CLOSE THE TRIMMER STACKER COVER; otherwise the machine cannot print/copy.
DO NOT OPEN THE TRIMMER STACKER COVER DURING PRINTING/COPYING; otherwise,
the machine will cease operating and a paper misfeed will occur.
After copying is completed, touch Booklet on the Application Selection Screen or
press [ AUTO RESET ] to release the mode and reset the machine.