Konica Minolta 7075 - Manual (Page 24)

1-12 Introduction
Introduction
Copier Features (continued)
Optional Equipment (continued)
Stapler Finisher (FS-108B) (continued)
Booklet tray: Stapled and folded, or simply folded booklets are to be delivered onto this
tray. These two finishing modes can be specified on the Finisher Mode Selection Screen.
Trimmer unit tray: This tray is attached to a trimmer unit (option) installed on the
stapler finisher (FS-108B). Folded or stapled and folded trimmed booklets are
delivered to this tray.
Cover Sheet Feeder (PI-108)
Used when selecting
COVER SHEET on the Finisher Mode Selection Screen, or when
stapling copies manually.
Trimmer Unit (TU-108)
Used when selecting
TRIM with STAPLING & FOLDING or FOLDING on the Finisher Mode
Selection Screen.
Large Capacity Tray (LT-401) (4,000 sheets)
Large Capacity Tray (LT-411) (4,000 sheets)
Expanded Memory Unit-64MB (MU-401)/128MB (MU-402)
Image Processor (IP-601)
HDD (HD-102)
Network Board (KN-302)
PostScript Unit (PS-361)