Konica Minolta 7075 - Manual (Page 91)

Basic Operations 6-21
Basic Operations
Copy Size (continued)
Selecting Paper Type/Size for Multi-sheet Bypass Tray (continued)
• When Wide size paper is highlighted, the popup menu will appear.
Use arrows to scroll to the desired wide size. In this case, both the wide size and
type selected will be indicated on the Basic Screen.
To specify the precise dimensions of paper to be used, follow the procedure below.
(1) Select the wide size as described above, then touch
Input size . The Size Input
popup menu will be displayed.
(2) Touch the vertical size key to highlight it, then use the keypad on the popup
menu to enter the vertical size, or use arrows to scroll to that number.
The entered number should fall within the range from the vertical size of the
standard size corresponding to the selected wide size to the maximum of 314mm.
(3) Similarly, touch the horizontal size key to highlight it, then use the keypad on the
popup menu to enter the horizontal size, or use arrows to scroll that number.
The entered number should fall within the range from the horizontal size of the
standard size corresponding to the selected wide size to the maximum of 445mm.
In this case, the wide size and paper type selected will be displayed on the Basic
Screen, but the actual size information cannot be displayed.
4 Touch OK to return to the Basic Screen.
Paper Type/Size Selection Screen
Paper Type/Size Selection Screen