Konica Minolta 7075 - Manual (Page 270)

13-46 Key Operator Mode
Key Operator Mode
Machine Management List Print [14]
Use this function to print out the list selected from the following items.
• Job memory list: Programmed contents of Job memory
• User management list: Home position settings selected by user
• E.C.M. management list: Machine information managed by ECM
• Font pattern list:
Font patterns used in the machine
Key Operator Mode Screen 2 Management List Print Menu Screen
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen. (See note.)
2 To display menus [11] to [18] of the Key Operator Mode Screen, touch Lower
arrow key.
3 Touch [14] Machine management list print to display the Management List Print Menu
Screen.
4 Touch the desired item on the screen. The Basic Screen will resume automatically.
5 Press [
START ] to start printing the selected list.
To suspend printing, press [ STOP ]. Press [P] and [C] in order to return to the
Management List Print Menu Screen.
6 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. If other key
operator settings are required, select the desired menu item, from [1] to [18].
7 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.