Konica Minolta 7075 - Manual (Page 152)

8-12 Special Original
Special Original
Original Form
The copier usually detects the standard size of originals fed through RADF or positioned
on the platen glass (STD size mode).
Use Non STD size mode to specify the scanning area manually for copying or printing
special size originals. Use Tab paper mode to copy tabbed original including the image
on the tab part onto tabbed copy paper.
❒ Scanning sizes in Non STD size mode: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"R, A3,
B4, A4R, B5R, A4, B5, WHOLE AREA
❒ Original sizes in Tab paper mode: 8.5"x14", 8.5"x11"R, 8.5"x11", A3, B4, A4R, A4, B5
❒ Incompatible Basic Copying Conditions: Folding / Stapling & Folding / Trimming with Booklet
❒ Incompatible Special Original: Mixed Original (Non STD Size and Tab Paper cannot be
selected at the same time.)
❒ Incompatible Applications: Combination, Booklet, Book Copy, Non-Image Area Erase, Image Shift
1 Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Original Screen.
2 Touch Non STD Size or Tab paper .
3 Touch the desired size key. When selecting WHOLE AREA on the Non STD size mode
menu, the copier scans the whole area of the platen glass and copies with the paper
size or magnification ratio currently selected.
4 Touch OK on the popup menu of the size keys.
5 Touch OK to complete the setting and return to the Basic Screen.
6 Make other compatible selections.
7 Position original(s) FACE UP in the document feeder, or FACE DOWN on the platen glass.
8 Press [
START ]. After copying is completed, press [ AUTO RESET ] to release the mode
and reset the machine.
Special Original Screen Popup menu for Non STD size mode
Popup menu for Tab paper mode