Kyocera copier - Manual (Page 104)

6-42 Basic Operations
Basic Operations
Using the Multi-Sheet Bypass Tray
The Multi-sheet bypass tray can be used to stack regular 16 lb~45 lb Bond paper.
❒ Bypass tray paper size: 11"x17"~5.5"x8.5"
❒ Bypass tray paper weight range: 16 lb~45 lb
❒ Bypass tray paper capacity: up to 150 sheets 20 lb
❒ Bypass tray Transparency film capacity: 1 sheet
1 Open the Multi-sheet bypass tray located on the right side of the copier.
When loading 11"x17" or 8.5"x14" paper, withdraw the right edge of the Multi-sheet
bypass tray.
2 Load copy paper, and align the paper guides to the paper size.
Load Transparency film one sheet at a time; or, stack paper, up to 150 sheets 20 lb
Bond.
Load offset tabbed sheets so that the tab extensions are on the right at the rear (not
front) of the tray. The top sheet is designated face up as the first tab of the finished
set. Subsequent offset tab sheets follow in sequence.