Auto layout, All-image area, Image shift/ reduce & shift – Kyocera copier User Manual
Page 211: Shortcuts
12-8 Shortcuts
Shortcuts
AUTO Layout
(p. 9-31)
1 Touch
APPLI.
to display the Application selection screen.
2 Touch
AUTO Layout
to center the original image on the copy paper.
3 Make additional copying selections, or touch
OK
to return to the Basic screen.
4 Select copy size and enter the print quantity amount.
5 Position original face up in the document feeder or face down on the platen glass
without skewing it. When using platen glass, DO NOT CLOSE the document cover.
6 Press [
START
]. When copying is completed, press [
AUTO RESET
] to reset the machine.
All-Image Area
(p. 9-33)
1 Touch
APPLI.
to display the Application selection screen.
2 Touch
All-image Area
if you wish to copy the image completely to the edges of the
paper.
3 Make additional copying selections, or touch
OK
to return to the Basic screen.
4 Select copy size and enter the print quantity amount.
5 Position original(s) face up on the document feeder tray or face down on the platen
glass.
6 Press [
START
]. When copying is completed, press [
AUTO RESET
] to reset the machine.
Image Shift/ Reduce & Shift
(p. 9-34)
1 First, select a copy mode (1-1, 1-2, 2-1, 2-2) and a copy size from the Basic screen.
2 Touch
APPLI.
to display the Application selection screen.
3 Touch
Image Shift
to display the Image shift selection screen.
4 Touch
Image Shift
(or
Reduce & Shift
, if image loss is likely).
5 Touch
FRONT
,
BACK
, or
BOTH SIDES
to indicate the side(s) on which you want the
shift to occur.
When Booklet or 2 Repeat mode of Repeat has been selected, the PAGE SPACE
setting is available.
6 Touch
UP SHIFT
,
DOWN SHIFT
,
RIGHT SHIFT
, or
LEFT SHIFT
to specify the shift
direction.
7 Use the touch screen keypad to enter the shift amount , from 0 ~ 250 mm.
8 Touch
OK
to return to the Application selection screen.
9 Make additional copying selections, or touch
OK
to return to the Basic screen.
10 Enter the print quantity amount.
11 Position original(s) face up on the document feeder tray or face down on the platen
glass.
12 Press [
START
]. When copying is completed, press [
AUTO RESET
] to reset the machine.