Kyocera copier - Manual (Page 168)

Applications 9-25
Applications
Reverse Image
Use Reverse image to reverse the image from black-on-white to white-on-black, and
vice versa.
❒ Original/Copy paper: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5"
❒ Incompatible Basic Copying Conditions: Folding, Stapling & Folding
❒ Incompatible Special Originals: None
❒ Incompatible Applications: Non-Image Area Erase, Repeat, All-Image Area
Application Selection Screen
Original Reverse Image copying
1 Touch APPLI. on the Basic Screen to display the Application Selection Screen.
2 Touch Reverse Image .
3 Select additional copying features, as desired.
4 Touch
OK to complete the setting and return to the Basic Screen.
5 Enter print quantity.
6 Position original(s) FACE UP in the document feeder or FACE DOWN on the platen
glass.
When using Platen store mode, see p. 6-28 to p. 6-29.
When using RADF store mode, see p. 6-30.
Option: Press [CHECK] to view the selection, and make a Proof copy, if desired; then touch EXIT to return
to the Basic Screen. See p. 6-35 to p. 6-37.
7 Press [ START ].
After copying is completed, touch Reverse Image on the Application Selection Screen
or press [ AUTO RESET ] to release the mode and reset the machine.