Group mode using primary (main) tray, Group mode using primary (main) tray -9, Output modes – Kyocera copier User Manual
Page 114
Output Modes 7-9
Output Modes
Group Mode Using Primary (Main) Tray
Use this mode when you want to group together multiple copies of each original, and
offset the sets upon exit. Grouped sets cannot be stapled.
❒
Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"
(5.5"x8.5" paper is available in landscape type feeding (
) only)
❒
Paper capacity for 20 lb: 500 sheets 5.5"x8.5"
3,000 sheets 8.5"x11"R, 8.5"x11"
1,500 sheets 11"x17", 8.5"x14"
1 Touch
OUTPUT APPLI.
on the Basic Screen to display the Finisher Mode Selection
Screen.
2 Touch
GROUP
, then
OK
to complete the setting and return to the Basic Screen.
The GROUP icon will be displayed in the OUTPUT icon area.
3 Enter the desired print quantity.
4 Position originals in the document feeder, and make copying selections as required.
When using Store mode, see p. 6-28 to p. 6-30.
5 Press [
START
].
30mm
3
3
2
2
1
1
Basic Screen
CAUTION:
When the finisher capacity is exceeded due to the print quantity selected, remove the copied sets while
the paper is exiting; otherwise mishandled paper will occur.
Basic Screen
Finisher Mode Selection Screen