Kyocera copier - Manual (Page 235)

13-22 Key Operator Mode
Key Operator Mode
ECM (Electronic Copy Monitor) Function Setting [4] (continued)
E.C.M. Function Setting [3]
Use this function to turn ECM On or Off; or to select whether the copier will stop at the
time the count limit is reached, or after the current copy job is completed.
ECM Setting Menu Screen ECM Function Setting Screen
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen. (See note 1.)
2 Touch [4] E.C.M. function setting . The ECM Master Key Code Screen displays, if a
code is required.
3 Enter your 8-digit ECM master key code, then touch OK to display the ECM Setting
Menu Screen. (See note 2.)
4 Touch [3] E.C.M. function setting . The ECM Function Setting Screen will be displayed.
5 Touch ECM On to activate ECM or touch ECM Off to de-activate ECM.
The selected key will be highlighted.
6 Touch Immediately to stop the machine when the copy limit is reached.
In this case, the paper in process will be completed, and “Enter ECM password” will
display after the copier stops.
Touch
After job to stop the machine after the current job is completed, when copy
limit is reached.
Touch
Warning only to display a warning message when copy limit is reached.
The selected key will be highlighted.
7 Touch OK to complete the setting and return to the ECM Setting Menu Screen.
8 If other ECM setting changes are required, touch desired key, from [1]~[3].
9 Touch
PREVIOUS SCREEN to restore the Key Operator Mode Screen. If other key
operator settings are required, select the desired menu item, from [1] to [18].
10 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
NOTES:
1 If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 If an invalid ECM master key code is entered, continue by entering the valid 8-digit code.