Kyocera copier - Manual (Page 185)

9-42 Applications
Applications
Stamp/Overlay (continued)
11 Make additional application selections, or touch OK to return to the Basic Screen.
12 When Overlay is selected, the Store mode is automatically selected, and APS and
AMS are released. Set the desired Copy mode, Copy density, Lens mode, and Copy
size on the Basic Screen.
13 Enter the desired print quantity.
14 Position original(s) FACE UP in document feeder or FACE DOWN on platen glass.
When Overlay is selected, follow the scanning procedure below.
(1) Position the overlaying original in the document feeder or on the platen glass, then
press [ START ] to scan.
(2) The second and subsequent pages are to be overlaid in printing. Place them in the
document feeder or on the platen glass, then press [ START ].
IMPORTANT: PLACE AND SCAN THE ORIGINALS IN REGULAR ORDER OF PAGINATION.
Option: Press [CHECK] to view selection, and make the Proof copy, if desired; then touch EXIT to return
to the Basic Screen. See p. 6-35 to p. 6-37.
15 Touch STORE to deselect the store mode, then press [ START ] to print.
After copying is completed, touch Stamp/Overlay on the Application Selection Screen
or press [ AUTO RESET ] to release the mode and reset the machine.