Kyocera copier - Manual (Page 241)

13-28 Key Operator Mode
Key Operator Mode
Weekly Timer [9]
This function can be accessed only by the key operator after a unique 4-digit Weekly
timer master key code is entered.
The Weekly Timer is a copier management function that shuts down power to the
machine on a daily or hourly basis, and can be programmed specifically for lunch
breaks, weekends and holidays, or any time the copier is not required.
In Addition, Timer Interrupt can be enabled (with or without a password requirement) to
allow temporary use of the machine during periods when power is shut down by the
Timer function.
Conditions required to use the Weekly Timer
• The power plug is inserted into the socket.
• The power switch is turned on.
• The current date and time are correctly set.
If the Weekly timer needs to be activated on your machine, contact your service
representative.
The following Weekly timer settings can be made.
[1] Weekly timer ON/OFF setting
Enable and disable the Timer function.
[2] Timer Setting
Specify the times that the copier will turn ON and OFF for each day of the week or the
entire week.
[3] Timer action ON/OFF Setting
Specify the working days of the machine by the Timer, for all Mondays through Sundays,
and/or individually for each day of the given month.
[4] Lunch hour off setting
Specify the lunch time interval during which the copier will go off and on.
[5] Timer interrupt password set
Require Password entry for the Timer off function and establish the amount of usage
time.
NOTES:
1 The time is set in terms of the 24 hour clock, where hour [1] is the first hour after midnight; and hour [24] is
the hour of midnight. For example, 6 a.m. is 06:00 hours; 6 p.m. is 18:00 hours.
2 The [AUTO RESET] key is used to change numbers determined by the SET touch key.