Kyocera copier - Manual (Page 222)

Key Operator Mode 13-9
Key Operator Mode
System Initial Setting [1] (continued)
IP Address Setting [3]
This setting is required to enable a PC to gain access to this machine.
NOTE: Ask your network manager to perform this setting. Incorrect setting may cause a trouble in other
network systems.
❒ Setting options: IP address; Subnetmask; Gateway addess, Line speed
System Initial Setting Menu Screen IP Address Setting Screen
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 Touch [1] System initial setting to display the System Initial Setting Menu Screen,
then touch [3] IP address setting to display the IP Address Setting Screen.
3 Make the required setting. When customizing the line speed, touch Line speed setting
to display the Line Speed Setting Screen. Touch the desired key, then touch OK to
restore the IP Adress Setting Screen.
4 Touch OK to complete the setting and return to the System Initial Setting Menu Screen.
5 If no further changes are required, proceed to step 7.
6 If other system initial settings are required, touch desired key.
7 Touch
PREVIOUS SCREEN to restore the Key Operator Mode Screen.
8 Touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.
Line Speed Setting Screen