Applications, Non-image area erase (continued) – Kyocera copier User Manual
Page 167
9-24 Applications
Applications
Non-Image Area Erase (continued)
1 Touch
APPLI.
on the Basic Screen to display the Application Selection Screen.
2 Touch
Non-image Area Erase
.
3 Select additional copying features, as desired.
4 Touch
OK
to complete the setting and return to the Basic Screen.
5 Enter print quantity.
6 Position original(s) FACE DOWN on the platen glass.
IMPORTANT: KEEP THE DOCUMENT FEEDER OPEN THROUGHOUT THE PROCEDURE.
When using Platen store mode, see p. 6-28 to p. 6-29.
Option: Press [CHECK] to view the selection, and make a Proof copy, if desired; then touch EXIT to return
to the Basic Screen. See p. 6-35 to p. 6-37.
7 Press [
START
].
After copying is completed, touch
Non-image Area Erase
on the Application Selection
Screen or press [
AUTO RESET
] to release the mode and reset the machine.
Application Selection Screen
Set original
General copying
Non-Image Area Erase