Kyocera copier - Manual (Page 199)

Server Function 11-7
Server Function
Image Store/Delete Mode (continued)
To Delete Image Data (continued)
1 Press [ MODE ] to light up the [ SCANNER/SERVER ] LED. The Scanner/Server Setting
Menu Screen will be displayed.
2 Touch IMAGE STORE/DELETE to display the Image Data Password Entry Screen.
3 Enter your Image data password from the touch screen keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each character,
then enter the correct password.
4 If the password is correct, touch OK to display the Job Name Entry Screen.
5 Touch the ▲ or ▼ key on the right side of the job name list to highlight the data to be
deleted, then touch JOB DELETE . The popup menu will appear to confirm that you
delete the selected data.
6 Touch YES to delete it, or touch NO to cancel. The popup menu will disappear.
7 Touch
RETURN TO PASSWORD SCREEN to restore the Image Data Password Entry
Screen.
8 Touch CANCEL to restore the Image Data Store/Delete Site Selection Screen.
9 Touch PREVIOUS SCREEN to restore the Scanner/Server Setting Menu Screen.
10Press [ MODE ] to light up the [ COPY ] LED. The Basic Screen will be displayed.
Job Name Entry Screen