Kyocera copier - Manual (Page 117)

7-12 Output Modes
Output Modes
Folding and Stapling & Folding Modes
The Folding and Stapling & Folding modes are available only when the 3 Paper Tray
finisher option is installed. When either mode is selected, the Booklet feature is
automatically selected and indicated on the Application Selection Screen.
NOTES: 1. When copying two-sided signature originals using the Folding or Stapling & Folding mode, release
the automatically selected Booklet mode on the Application Selection Screen.
2. When copying dark originals or using Reverse Image mode together with Folding or Stapling &
Folding mode, the folded line of the output copies may be slightly shifted.
The following copy results may be expected when using Folding or Stapling & Folding
Modes:
In the Folding mode, each copied set is folded and output to the Booklet tray of the
finisher.
In the Stapling & Folding mode, each copied set is stapled at two positions (saddle
stitched), then folded and output to the Booklet tray of the finisher.
❒ Use RADF.
❒ Max. number of folded sheets (20 lb Bond) in both modes:
Folding: 3 sheets (less than in Staple & Folding mode because they are not cinched first)
Stapling & Folding: 16 sheets
15 sheets when using thick cover paper
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R
❒ Paper weight: 16~24 lb; Special stock (20 lb paper is recommended)
❒ Booklet tray capacity:
When the Booklet tray capacity is exceeded, the finisher will stop operating. Select an
appropriate print quantity referring to the following capacity.
Approx. 100 sheets max.
Folding; 33 sets max. of 3-sheet-folded booklet (33 x 3 = 99 sheets)
Stapling & Folding; 20 sets max. of 5-sheet-folded booklet (20 x 5 = 100 sheets)
6 sets max. of 15-sheet-folded booklet (6 x 15 = 90 sheets)
❒ Incompatible Basic Copying Conditions with Booklet selected: APS, Sort, Staple-sort, Group,
Cover sheet feeding, 1-1, 2-1, Rotation Sort, Rotation Group
❒ Incompatible Original Scanning Conditions with Booklet selected: Resolution (Very high),
Mixed Original, Non STD size
❒ Incompatible Applications with Booklet selected: Sheet/Cover Insertion, Combination,
Transparency Interleave, Program Job, Non-Image Area Erase, Repeat, Frame/Fold Erasure,
AUTO Layout, Shift mode in Image Shift, Overlay
❒ Incompatible conditions without Booklet: Sort, Staple-sort, Group, Rotation Sort, Rotation
Group, Mixed Original with APS, Transparency Interleave