Copy mode using radf, Copy mode using radf -5, Basic operations – Kyocera copier User Manual
Page 67: Copy mode (continued)
Basic Operations 6-5
Basic Operations
Copy Mode (continued)
Copy Mode Using RADF
Before selecting the Copy Mode shown on the screen below, read specifications on the
previous page and see Section 4 for information on positioning originals.
1 Touch the desired mode key
on the Basic Screen
:
1
s
s
s
s
s
1
,
1
s
s
s
s
s
2
,
2
s
s
s
s
s
1
, or
2
s
s
s
s
s
2
.
A copy mode key will appear dimmed if it is incompatible with other selections made.
2 Position originals FACE UP in the document feeder, as required.
3 When all settings are acceptable, press [
START
].
To cancel the mode, touch the desired Copy Mode key on the Basic Screen.
NOTE: When the finisher capacity is exceeded due to the print quantity selected, remove the copied sets
while the paper is exiting; otherwise, mishandled paper will occur.
Basic Screen (with 1
s
2 mode selected)