Kyocera copier - Manual (Page 129)

7-24 Output Modes
Output Modes
Output Mode for Machine without Finisher (continued)
Face Up Exit
Unless Face Up Exit is selected, all simplex copies and odd numbered duplex copies
exit to the tray face down. When Face Up Exit is selected, all simplex copies and odd
numbered duplex copies exit face up. While the Face Up Exit mode reduces the amount
of paper movement, you will be required to arrange pages in the correct order, manually.
❒ Face up exit can be selected together with Non-sort, Rotation sort, Group, or Rotation group.
❒ When using the platen glass with simplex (1-1) copying, start copying from the last page first
and continue in that reverse order to output the set in correct order.
❒ Incompatible: None
❒ When using the Multi-sheet bypass tray, the Face Up mode is automatically selected. To
release this setting, contact your service representative.
To Set Face Up Non-Sort Exit
1 Confirm that the
SORT key is not highlighted.
If SORT is highlighted, touch SORT to deselect it.
2 Touch OUTPUT APPLI. to display the Output Menu Screen.
3 Touch FACE UP to highlight it.
4 Touch OK to complete the setting and return to the Basic Screen.
Output Menu Screen Basic Screen